产品中心/ products

您的位置:首页  -  产品中心  -  压力开关/温度开关  -  波纹管/膜片式压力开关  -  英国 Delta-controls 膜片压力开关 S21

英国 Delta-controls 膜片压力开关 S21

  • 产品型号:
  • 更新时间:2024-06-25

简要描述:英国 Delta-controls 膜片压力开关 S21
The model S21 Pressure Switch is suitable for setpoints between -1bar and 100 bar with maximum working pressures up to 155 bar.

产品详情

英国 Delta-controls 膜片压力开关 S21

S21 PRESSURE SWITCH

                  

Industrial Series

Fixed Deadband

The model S21 Pressure Switch is suitable for setpoints between -1bar and 100 bar with maximum working pressures up to 155 bar.

  • FEATURES & BENEFITS
  1.  Better than 1% set-point repeatability
    Users can expect a set-point repeatability performance better than 1% on all configurations with some configurations being significantly better
  2.  Extensive range of approvals
    The Industrial Series switches are available with wide range of different approvals including European and North American Hazardous Area approvals
  3.  Safety
    All Industrial Series models come with a safety vent to prevent the enclosure becoming pressurized in the event that the sensor is inadvertently damaged by excessive pressure. In addition, all models have been certified for use in safety systems up to and including SIL 2.
  4. DOCUMENTATION
  5. Operational instructions

  6. IOM-S20.pdf
  7. NEC 500 Explosionproof
  8. NEC 500 Intrinsic Safety
  9. GPN Permit (Belarus)
  10. ATEX Ex d
  11. ATEX Ex ia
  12. PED CAT IV
  13. SIL 2
  14. Approvals

    Technical datasheet

  15. TDS-S20.pdf
  16. SUPPORT
  17. Technical advice 
  18. Installation support 
  19. Recalibration 
  20. Local support 
  21. Instrumentation repairs 
  22. Spare parts
  23.  

The Industrial Series switches were developed in the mid-1990's to offer customers a robust range of switches suitable for applications where requirements were more standard than those for which the highly configurable Performance Series switches were designed.

Using diaphragm based sensors and a more traditional in-line force balance mechanism to transfer movement from the sensor to the microswitch, these switches are suitable for a wide range of industrial applications. Various international approvals make the Industrial Series suitable for use in both safe and Hazardous Areas in Europe, North America and throughout the world.

With the recent launch of the Sentry Series, these Industrial models are now recommended mainly for aftermarket applications where a like for like replacement is needed.

  •  Epoxy coated aluminium or stainless steel housings approved to IP66 and NEMA 4X
  •  SPDT and DPDT switch contacts with environmentally and hermetically sealed options
  •  Stainless steel wetted parts as standard
  •  Better than 1% set-point repeatability
  •  Pressure ranges from 0.4 to 700 bar 
  •  Pmax up to 1000 bar depending on range
  • This is the introduction of the Delta-controls  model S21 Pressure Switch  ,if you are interesting in it ,please contact us.
在线咨询

留言框

  • 产品:

  • 您的单位:

  • 您的姓名:

  • 联系电话:

  • 常用邮箱:

  • 省份:

  • 详细地址:

  • 补充说明:

  • 验证码:

    请输入计算结果(填写阿拉伯数字),如:三加四=7
公司简介  >  在线留言  >  联系我们  >  

CONTACT

办公地址:上海市北京东路科技京城西楼30楼

TEL:15800509017 / 15921675992

EMAIL:2822212495@qq.com
扫码加微信
版权所有©2024 上海骋利电子科技有限公司 All Rights Reserved   备案号:沪ICP备2021016462号-3   sitemap.xml技术支持:化工仪器网   管理登陆

扫码加微信